The Screw,machine, cataloged under National Stock Number 5305-01-126-1184, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Safran Power Usa Llc. Government technical data includes 15 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-126-1184 |
| Primary Part Number | 05-347673 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Safran Power Usa Llc |
| Status | ACTIVE |
| Screw Surface Treatment | CADMIUM |
| Fastener Length | 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN |
| Thread Length | 0.449 INCHES MINIMUM AND 0.553 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | SLOT |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNF |
| Head Diameter | 0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416 TY 1 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 05-347673 PRIMARY | Safran Power Usa Llc (USA) |
NSN 5305-01-126-1184 is a Screw,machine, manufactured by Safran Power Usa Llc, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-126-1184 has 1 manufacturer part number on file: 05-347673 (Safran Power Usa Llc).
Key specifications for 05-347673: Screw Surface Treatment: CADMIUM; Fastener Length: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN; Thread Length: 0.449 INCHES MINIMUM AND 0.553 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.190 INCHES IN. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.