The Screw,close Tolerance, cataloged under National Stock Number 5305-01-124-4455, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Huck International, Inc. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 5 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-124-4455 |
| Primary Part Number | H044-4-13 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Huck International, Inc |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Fastener Length | 1.167 INCHES MINIMUM AND 1.197 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.345 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 49.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN |
| Grip Diameter | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.447 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| H044-4-13 PRIMARY | Huck International, Inc (USA) |
| 121557-4-A13P PRIMARY | Sps Technologies, Llc Dba PB Fasteners (USA) |
| PBF1165-4-13 PRIMARY | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| AIC984-4-13 PRIMARY | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| VT169F4-13 PRIMARY | Howmet Global Fastening Systems Inc (USA) |
| Reference | Meaning |
|---|---|
| 121557-4-A13P | 3/2 Design control — primary reference U.S. Government activity |
| C7984-4-13 | 7/2 Vendor item drawing reference U.S. Government activity |
| AIC984-4-13P | 5/9 Secondary reference Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company |
| VT1693F4-13 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-124-4455 is a Screw,close Tolerance, manufactured by Huck International, Inc, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-124-4455 has 5 manufacturer part numbers on file: H044-4-13 (Huck International, Inc), 121557-4-A13P (Sps Technologies, Llc Dba PB Fasteners), PBF1165-4-13 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners), AIC984-4-13 (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company), VT169F4-13 (Howmet Global Fastening Systems Inc).
Key specifications for H044-4-13: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Fastener Length: 1.167 INCHES MINIMUM AND 1.197 INCHES MAXIMUM IN; Surface Treatment Document and Classification: NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.