The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-121-3410, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-121-3410 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN |
| Head Height | 0.160 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN |
| Fastener Length | 0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TYPE 1 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.294 INCHES MINIMUM AND 0.324 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AISI ASSN STD ALL MATERIAL RESPONSES OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 75000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OVERALL |
| Thread Series Designator | UNF |
| Head Diameter | 0.265 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS608-4-6P | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-121-3410 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-121-3410: Width Across Flats: 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN; Head Height: 0.160 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN; Fastener Length: 0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TYPE 1 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.