The Screw,assembled Washer, cataloged under National Stock Number 5305-01-121-1648, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 28 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-121-1648 |
| Item Name | Screw,assembled Washer |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN |
| Fastener Length | 0.343 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Secondary Washer Relationship to Primary Washer | NOT IDENTICAL |
| Surface Treatment Document and Classification | QQ-N-290 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Primary Washer Outside Diameter | 0.334 INCHES MAXIMUM IN |
| Thread Length | 0.327 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Material Document and Classification | QQ-P-613 FED SPEC SINGLE MATERIAL RESPONSE SECONDARY WASHER |
| Material Document and Classification | QQ-P-750,COMP A FED SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER |
| Secondary Washer Style | FLAT |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | PAN NO. 2 |
| Primary Washer Style | SPLIT HELICAL RING |
| Thread Direction | RIGHT-HAND |
| Primary Washer Material Thickness | 0.047 INCHES MINIMUM IN |
| Specification/standard Data | 80205-NAS720 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Secondary Washer Outside Diameter | 0.338 INCHES MINIMUM AND 0.348 INCHES MAXIMUM IN |
| Surface Treatment | TIN OVERALL |
| Minimum Tensile Strength | 55000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Thread Class | 2A A |
| Secondary Washer Material Thickness | 0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN |
| Thread Quantity Per Inch | 32 |
| Material | COPPER ALLOY 230 OR COPPER ALLOY 240 OR COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 342 OR COPPER ALLOY 353 OR COPPER ALLOY 360 OR COPPER ALLOY 377 FASTENER |
| Material | COPPER ALLOY 260 OR COPPER ALLOY 268 SECONDARY WASHER |
| Material | COPPER ALLOY 510 PRIMARY WASHER |
| Thread Series Designator | UNF |
| Washer Quantity | 2 |
| Head Diameter | 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS720B10-6 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-121-1648 is a Screw,assembled Washer, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-121-1648: Head Height: 0.099 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN; Fastener Length: 0.343 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN; Secondary Washer Relationship to Primary Washer: NOT IDENTICAL; Surface Treatment Document and Classification: QQ-N-290 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 28 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.