The Screw,close Tolerance, cataloged under National Stock Number 5305-01-112-4353, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-112-4353 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Fastener Length | 2.187 INCHES MINIMUM AND 2.234 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE GRIP |
| Thread Length | 0.615 INCHES MINIMUM AND 0.682 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS336 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM IN |
| Grip Diameter | 0.3733 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE GRIP |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.752 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS336CP21 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-112-4353 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-112-4353: Surface Finish: 32.0 MICROINCHES GRIP; Fastener Length: 2.187 INCHES MINIMUM AND 2.234 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE GRIP; Thread Length: 0.615 INCHES MINIMUM AND 0.682 INCHES MAXIMUM IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.