The Screw,close Tolerance, cataloged under National Stock Number 5305-01-111-6685, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 7 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 9 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-111-6685 |
| Primary Part Number | NAS1123-6H |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.103 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN |
| Fastener Length | 0.636 INCHES MINIMUM AND 0.666 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Hole Configuration Style | ROUND |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1123 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OVERALL |
| Hole Quantity | 1 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Hole Type | DRILLED |
| Hole Diameter | 0.034 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN |
| Head Diameter | 0.306 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| NAS1123-6H PRIMARY | Hi-Shear Corporation (USA) |
| NAS1123-6H | Nor-Cal Supply Co (USA) |
| NAS1123-6H | Plastic and Metal Products Corporation (USA) |
| NAS1123-6H PRIMARY | Apcom Inc (USA) |
| NAS1123-6H PRIMARY | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| NAS1123-6H PRIMARY | Qualified Air Components Inc. (USA) |
| NAS1123-6H PRIMARY | Fastener Innovation Technology, Inc. Dba F I T (USA) |
| Reference | Meaning |
|---|---|
| NAS1123-6H | 5/9 Secondary reference F and C Sales Inc |
| NAS1123-6H | 5/9 Secondary reference Air Industries Co Inc |
| NAS1123-6H | 5/9 Secondary reference U.S. Government activity |
| NAS1123-6H | 3/2 Design control — primary reference U.S. Government activity |
| NAS1123-6H | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| NAS1123-6H | 3/2 Design control — primary reference U.S. Government activity |
| NAS1123-6H | 3/2 Design control — primary reference U.S. Government activity |
| NAS1123-6H | C/1 Advisory reference — outside the item-of-supply concept Huck International, Inc |
| NAS1123-6H | 5/9 Secondary reference Lawrence Engineering and Supply Inc |
NSN 5305-01-111-6685 is a Screw,close Tolerance, manufactured by Hi-Shear Corporation, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-111-6685 has 7 manufacturer part numbers on file: NAS1123-6H (Hi-Shear Corporation), NAS1123-6H (Nor-Cal Supply Co), NAS1123-6H (Plastic and Metal Products Corporation), NAS1123-6H (Apcom Inc), NAS1123-6H (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc) and 2 more.
Key specifications for NAS1123-6H: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.103 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN. 27 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.