PartsTable TECHNICAL DATA SHEET
NSN 5305-01-105-3447Government record, cited

Screw, Close Tolerance5305-01-105-3447

NSN 5305-01-105-3447 · NIIN 011053447
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-105-3447 · 5305011053447 · NIIN 011053447 · 01-105-3447 · FSC 5305 Screws
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Fastener Length: 1.501 INCHES MINIMUM AND 1.531 INCHES MAXIMUM IN
  • Thread Length: 0.391 INCHES NOMINAL IN
  • Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
  • Shank Unthreaded Hole Diameter: 0.106 INCHES NOMINAL FIRST HOLE IN
  • Nominal Thread Diameter: 0.3750 INCHES IN
  • Head Style: FLAT COUNTERSUNK
  • Thread Direction: RIGHT-HAND
Identification
  • NSN: 5305-01-105-3447
  • NIIN: 011053447
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-01-105-3447, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-105-3447
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Fastener Length1.501 INCHES MINIMUM AND 1.531 INCHES MAXIMUM IN
Thread Length0.391 INCHES NOMINAL IN
Hardness Rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
Shank Unthreaded Hole Diameter0.106 INCHES NOMINAL FIRST HOLE IN
Nominal Thread Diameter0.3750 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Specification/standard Data80205-NAS1206 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
Grip Length1.125 INCHES NOMINAL IN
Grip Diameter0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN
Surface TreatmentCADMIUM AND CHROMATE OVERALL
Minimum Tensile Strength160000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleCROSS RECESS TYPE 1
Countersink Angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
Thread Quantity Per Inch24
MaterialSTEEL OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Distance From Head Largest Bearing Surface to Shank Hole Center1.396 INCHES NOMINAL FIRST HOLE IN
Head Diameter0.704 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
NAS1206-18D 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-105-3447?

NSN 5305-01-105-3447 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-01-105-3447?

Key specifications for 5305-01-105-3447: Fastener Length: 1.501 INCHES MINIMUM AND 1.531 INCHES MAXIMUM IN; Thread Length: 0.391 INCHES NOMINAL IN; Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL; Shank Unthreaded Hole Diameter: 0.106 INCHES NOMINAL FIRST HOLE IN. 19 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-105-3447 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com