The Screw,close Tolerance, cataloged under National Stock Number 5305-01-102-0314, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-102-0314 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 1.134 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.374 INCHES MINIMUM AND 0.441 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OR AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN |
| Grip Diameter | 0.3733 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.698 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| SFT22-6-A12 | 3/2 Design control — primary reference U.S. Government activity |
| SFT22-6-A12 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
NSN 5305-01-102-0314 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-102-0314: Fastener Length: 1.134 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN; Surface Treatment Document and Classification: NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.374 INCHES MINIMUM AND 0.441 INCHES MAXIMUM IN; Hardness Rating: 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.