The Screw,machine, cataloged under National Stock Number 5305-01-101-6015, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-101-6015 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | CADMIUM AND CHROMATE |
| Fastener Length | 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Screw Material Document and Classification | ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE |
| Thread Length | 0.648 INCHES MINIMUM AND 0.721 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.086 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS662 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Screw Material | STEEL COMP 1010 |
| Minimum Tensile Strength | 550000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 56 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.156 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS662-2-12 | 3/2 Design control — primary reference U.S. Government activity |
| FF-S-92 | 4/1 Identification reference U.S. Government activity |
NSN 5305-01-101-6015 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-101-6015: Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN; Screw Material Document and Classification: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE; Thread Length: 0.648 INCHES MINIMUM AND 0.721 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.