PartsTable TECHNICAL DATA SHEET
NSN 5305-01-097-8936Government record, cited

Screw, Cap, Socket Head5305-01-097-8936

NSN 5305-01-097-8936 · NIIN 010978936
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-097-8936 · 5305010978936 · NIIN 010978936 · 01-097-8936 · FSC 5305 Screws · N171P25056 · FF-S-86
Nearby stock numbers  ·
Features
  • Screw,cap,socket Head — FSC 5305
  • Width Across Flats: 0.313 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
  • Head Height: 0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
  • Fastener Length: 3.469 INCHES MINIMUM AND 3.531 INCHES MAXIMUM IN
  • Special Test Features: SPECIAL QUALITY CONTROL TESTING
  • Thread Length: 1.250 INCHES MINIMUM IN
  • Criticality Code Justification: ZZZY
  • Nominal Thread Diameter: 0.375 INCHES IN
Identification
  • NSN: 5305-01-097-8936
  • NIIN: 010978936
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-097-8936, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-097-8936
Item NameScrew,cap,socket Head
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Width Across Flats0.313 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
Head Height0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
Fastener Length3.469 INCHES MINIMUM AND 3.531 INCHES MAXIMUM IN
Special Test FeaturesSPECIAL QUALITY CONTROL TESTING
Thread Length1.250 INCHES MINIMUM IN
Criticality Code JustificationZZZY
Nominal Thread Diameter0.375 INCHES IN
Head StyleFLAT CHAMFER
Thread DirectionRIGHT-HAND
Nondefinitive Spec/std Data6 TYPE
Surface TreatmentPASSIVATE OVERALL
Internal Drive StyleHEXAGON
Thread Class3A A
Test Data Document81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch16
MaterialSTEEL CORROSION RESISTING OVERALL
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Reference Number Differentiating CharacteristicsAS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
Head Diameter0.550 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeY
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
N171P25056 3/9 Design control — primary reference
Ametek Advanced Industries, Inc.
FF-S-86 4/1 Identification reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-097-8936?

NSN 5305-01-097-8936 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-01-097-8936?

Key specifications for 5305-01-097-8936: Width Across Flats: 0.313 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN; Head Height: 0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN; Fastener Length: 3.469 INCHES MINIMUM AND 3.531 INCHES MAXIMUM IN; Special Test Features: SPECIAL QUALITY CONTROL TESTING. 19 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-097-8936 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com