The Screw,close Tolerance, cataloged under National Stock Number 5305-01-097-6574, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-097-6574 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES GRIP |
| Fastener Length | 2.422 INCHES MINIMUM AND 2.454 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY 1 CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-416 TY 2 CLASS 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL |
| Thread Length | 0.350 INCHES MINIMUM AND 0.402 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 2.052 INCHES MINIMUM AND 2.072 INCHES MAXIMUM IN |
| Grip Diameter | 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OR CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OR STEEL COMP 4037 OVERALL |
| Thread Series Designator | UNF |
| Head Diameter | 0.451 INCHES MINIMUM AND 0.511 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| BACB30AB-P4-33A | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-097-6574 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-097-6574: Surface Finish: 63.0 MICROINCHES GRIP; Fastener Length: 2.422 INCHES MINIMUM AND 2.454 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TY 1 CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-416 TY 2 CLASS 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL; Thread Length: 0.350 INCHES MINIMUM AND 0.402 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.