The Screw,close Tolerance, cataloged under National Stock Number 5305-01-092-0089, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-092-0089 |
| Primary Part Number | AIC984-5-11 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Fastener Length | 1.111 INCHES MINIMUM AND 1.141 INCHES MAXIMUM IN |
| Thread Length | 0.413 INCHES MINIMUM AND 0.463 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 49.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN |
| Grip Diameter | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.573 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| AIC984-5-11 PRIMARY | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| Reference | Meaning |
|---|---|
| AIC984-5-11P | 5/9 Secondary reference Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company |
NSN 5305-01-092-0089 is a Screw,close Tolerance, manufactured by Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-092-0089 has 1 manufacturer part number on file: AIC984-5-11 (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company).
Key specifications for AIC984-5-11: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Fastener Length: 1.111 INCHES MINIMUM AND 1.141 INCHES MAXIMUM IN; Thread Length: 0.413 INCHES MINIMUM AND 0.463 INCHES MAXIMUM IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.