The Screw,machine, cataloged under National Stock Number 5305-01-084-4655, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-084-4655 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Screw Material Document and Classification | QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE |
| Thread Length | 0.159 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.138 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nondefinitive Spec/std Data | 3 TYPE AND 3C STYLE |
| Screw Material | COPPER |
| Minimum Tensile Strength | 55000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS24693-B25 | 2/2 Government specification standardization U.S. Government activity |
| FF-S-92 | 4/1 Identification reference U.S. Government activity |
NSN 5305-01-084-4655 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-084-4655: Fastener Length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN; Screw Material Document and Classification: QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE; Thread Length: 0.159 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.138 INCHES IN. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.