The Screw,machine, cataloged under National Stock Number 5305-01-082-3532, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-082-3532 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | PASSIVATE |
| Fastener Length | 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Screw Material Document and Classification | QQ-S-763,COMP 410 FED SPEC SINGLE MATERIAL RESPONSE |
| Thread Length | 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL |
| Internal Drive Style | CROSS RECESS TYPE II |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Test Data Document | 81349-MIL-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNF |
| Head Diameter | 0.308 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | MIL-S-5002 MIL STD SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 99-4593-03 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-082-3532 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-082-3532: Screw Surface Treatment: PASSIVATE; Fastener Length: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN; Screw Material Document and Classification: QQ-S-763,COMP 410 FED SPEC SINGLE MATERIAL RESPONSE; Thread Length: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.