The Setscrew, cataloged under National Stock Number 5305-01-080-5721, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-080-5721 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN |
| Fastener Length | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Hardness Rating | 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | HEADLESS (SETSCREW) |
| Thread Direction | RIGHT-HAND |
| Point Style | FULL DOG |
| Nondefinitive Spec/std Data | 1 TYPE AND 5 STYLE |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FF-S-200 | 4/1 Identification reference U.S. Government activity |
| AN565C416H6 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-01-080-5721 is a Setscrew, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-080-5721: Width Across Flats: 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN; Fastener Length: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.