The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-079-7247, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 15 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-079-7247 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Fastener Length | 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.202 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN |
| Material Document and Classification | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1189 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Locking Feature | PATCH OR PELLET OR STRIP THREADS |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | PLASTIC LOCKING FEATURE |
| Material | IRON ALLOY 660 FASTENER |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.322 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1189E3P6 | 5/9 Secondary reference U.S. Government activity |
| NK507C1032-6 | 5/9 Secondary reference Nylok Llc |
| NAS1189E3P6 | 5/9 Secondary reference Fastener Innovation Technology, Inc. Dba F I T |
| NAS1189E3P6 | 5/9 Secondary reference Nor-Cal Supply Co |
| NAS1189E3P6 | 5/9 Secondary reference Plastic and Metal Products Corporation |
| NAS1189E3P6 | 3/2 Design control — primary reference U.S. Government activity |
| NAS1189E3P6 | 5/9 Secondary reference Hardware Specialty Co. Inc. Dba Hardware Specialty Co Inc |
| NAS1189E3P6 | 5/9 Secondary reference Lawrence Engineering and Supply Inc |
| NAS1189E3P6 | 5/9 Secondary reference Nd Industries Inc Div Eastern Division |
| NAS1189E3P6 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| NAS1189E3P6 | 5/9 Secondary reference Hi-Shear Corporation |
| NAS1189E3P6 | 5/9 Secondary reference Apcom Inc |
| NAS1189E3P6 | 5/9 Secondary reference Long-Lok Llc |
| NAS1189E3P6 | 5/9 Secondary reference Huck International, Inc |
| NAS1189E3P6 | 5/9 Secondary reference U.S. Government activity |
NSN 5305-01-079-7247 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-079-7247: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Fastener Length: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.