The Screw,close Tolerance, cataloged under National Stock Number 5305-01-078-2929, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is The Boeing Company Div Defense. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-078-2929 |
| Primary Part Number | ST3M652C3-11D |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | The Boeing Company Div Defense |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Head Height | 0.044 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN |
| Fastener Length | 1.078 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN |
| Thread Length | 0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN |
| Material Document and Classification | 23-112,FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK UNDERCUT |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 76301-ST3-652 MANUFACTURERS STANDARD |
| Grip Length | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN |
| Grip Diameter | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | HIGH-TORQUE |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL CORROSION RESISTING OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.377 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| ST3M652C3-11D PRIMARY | The Boeing Company Div Defense (USA) |
| 11925C3-11D | Reid Products Inc. Dba Reid Products Inc (USA) |
| HT4020-3-11 | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| HT4020-3-11 | Hi-Shear Corporation (USA) |
| Reference | Meaning |
|---|---|
| HT4020-3-11 | C/1 Advisory reference — outside the item-of-supply concept Huck International, Inc |
| HT4020-3-11 | 5/2 Secondary reference U.S. Government activity |
| HT4020-3-11 | 5/2 Secondary reference U.S. Government activity |
| HT4020-3-11 | C/1 Advisory reference — outside the item-of-supply concept Howmet Global Fastening Systems Inc |
| HT4020-3-11 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| HT4020-3-11 | 5/9 Secondary reference U.S. Government activity |
NSN 5305-01-078-2929 is a Screw,close Tolerance, manufactured by The Boeing Company Div Defense, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-078-2929 has 4 manufacturer part numbers on file: ST3M652C3-11D (The Boeing Company Div Defense), 11925C3-11D (Reid Products Inc. Dba Reid Products Inc), HT4020-3-11 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), HT4020-3-11 (Hi-Shear Corporation).
Key specifications for ST3M652C3-11D: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Head Height: 0.044 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN; Fastener Length: 1.078 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.