The Screw,cap,hexagon Head, cataloged under National Stock Number 5305-01-070-2091, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-070-2091 |
| Item Name | Screw,cap,hexagon Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN |
| Fastener Length | 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.619 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Hardness Rating | 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | ASTM A354, BD ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Surface Treatment | ZINC AND CHROMATE OVERALL |
| Minimum Tensile Strength | 150000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS18153-110 | 5/9 Secondary reference U.S. Government activity |
| B1821BH050F075D | 3/2 Design control — primary reference U.S. Government activity |
| FF-S-85 | 5/9 Secondary reference U.S. Government activity |
NSN 5305-01-070-2091 is a Screw,cap,hexagon Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-070-2091: Head Height: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN; Fastener Length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN; Surface Treatment Document and Classification: ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.619 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.