PartsTable TECHNICAL DATA SHEET
NSN 5305-01-069-5978Government record, cited

Screw, Externally Relieved Body5305-01-069-5978

NSN 5305-01-069-5978 · NIIN 010695978 · Part number 6114-SS-2528-7
Carey Manufacturing Co, Inc Dba Amatom Electronic Hardware Div Amatom Electronic Hardware · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 1YGB8
Government record, cited
NSN 5305-01-069-5978 — this item is cataloged by the U.S. Government under National Stock Number 5305-01-069-5978. Manufacturer of record part number: 6114-SS-2528-7.
Also searched as  5305-01-069-5978 · 5305010695978 · NIIN 010695978 · 01-069-5978 · FSC 5305 Screws · CAGE 1YGB8 · 6114-SS-2528-7 · 76872-60
Nearby stock numbers  ·
Features
  • Screw,externally Relieved Body — FSC 5305
  • Head Height: 0.546 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
  • Fastener Length: 1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Special Test Features: SPECIAL QUALITY CONTROL TESTING
  • Thread Length: 0.303 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
  • Criticality Code Justification: ZZZY
  • Material Document and Classification: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A276 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Identification
  • NSN: 5305-01-069-5978
  • NIIN: 010695978
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 6114-SS-2528-7
  • Manufacturer: Carey Manufacturing Co, Inc Dba Amatom Electronic Hardware Div Amatom Electronic Hardware
General Description

The Screw,externally Relieved Body, cataloged under National Stock Number 5305-01-069-5978, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Carey Manufacturing Co, Inc Dba Amatom Electronic Hardware Div Amatom Electronic Hardware. Government technical data includes 22 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-069-5978
Primary Part Number6114-SS-2528-7
Item NameScrew,externally Relieved Body
FSC / FSG5305 / 53 — Screws
ManufacturerCarey Manufacturing Co, Inc Dba Amatom Electronic Hardware Div Amatom Electronic Hardware
StatusACTIVE
Head Height0.546 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
Fastener Length1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Special Test FeaturesSPECIAL QUALITY CONTROL TESTING
Thread Length0.303 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
Criticality Code JustificationZZZY
Material Document and ClassificationASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A276 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
First Diameter From Head0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
Nominal Thread Diameter0.250 INCHES IN
Head StyleKNURLED NO. 4
Thread DirectionRIGHT-HAND
Distance From Largest Bearing Surface of Head to End of First Diameter0.745 INCHES MINIMUM AND 0.764 INCHES MAXIMUM IN
Externally Relieved Body Diameter Quantity1
Surface TreatmentPASSIVATE OVERALL
Internal Drive StyleSLOT
Thread Class2A A
Test Data Document81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch28
MaterialSTEEL COMP 303 OVERALL
Thread Series DesignatorUNF
Reference Number Differentiating CharacteristicsAS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
Head Diameter0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeY
Cross-Reference Index
Part NumberManufacturer
6114-SS-2528-7 Carey Manufacturing Co, Inc Dba Amatom Electronic Hardware Div Amatom Electronic Hardware (USA)
Reference documents
ReferenceMeaning
76872-60 C/1 Advisory reference — outside the item-of-supply concept
Zf Industrieantriebe Witten Gmbh
6114-SS-2528-7 3/9 Design control — primary reference
New Haven Mfg Corp Amatom Electronic Hardware Div

Frequently Asked Questions

What is NSN 5305-01-069-5978?

NSN 5305-01-069-5978 is a Screw,externally Relieved Body, manufactured by Carey Manufacturing Co, Inc Dba Amatom Electronic Hardware Div Amatom Electronic Hardware, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-01-069-5978?

NSN 5305-01-069-5978 has 1 manufacturer part number on file: 6114-SS-2528-7 (Carey Manufacturing Co, Inc Dba Amatom Electronic Hardware Div Amatom Electronic Hardware).

What are the specifications of 6114-SS-2528-7?

Key specifications for 6114-SS-2528-7: Head Height: 0.546 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN; Fastener Length: 1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Special Test Features: SPECIAL QUALITY CONTROL TESTING. 22 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-069-5978 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com