PartsTable TECHNICAL DATA SHEET
NSN 5305-01-067-7000Government record, cited

Screw, Externally Relieved Body5305-01-067-7000

NSN 5305-01-067-7000 · NIIN 010677000
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-067-7000 · 5305010677000 · NIIN 010677000 · 01-067-7000 · FSC 5305 Screws
Nearby stock numbers  ·
Features
  • Screw,externally Relieved Body — FSC 5305
  • Head Height: 0.675 INCHES MINIMUM AND 0.705 INCHES MAXIMUM IN
  • Fastener Length: 1.800 INCHES NOMINAL IN
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Special Test Features: SPECIAL QUALITY CONTROL TESTING
  • Thread Length: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
  • Criticality Code Justification: ZZZY
  • Material Document and Classification: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Identification
  • NSN: 5305-01-067-7000
  • NIIN: 010677000
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,externally Relieved Body, cataloged under National Stock Number 5305-01-067-7000, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 22 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-067-7000
Item NameScrew,externally Relieved Body
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Head Height0.675 INCHES MINIMUM AND 0.705 INCHES MAXIMUM IN
Fastener Length1.800 INCHES NOMINAL IN
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Special Test FeaturesSPECIAL QUALITY CONTROL TESTING
Thread Length0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
Criticality Code JustificationZZZY
Material Document and ClassificationASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
First Diameter From Head0.275 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
Nominal Thread Diameter0.375 INCHES IN
Head StyleKNURLED NO. 4
Thread DirectionRIGHT-HAND
Distance From Largest Bearing Surface of Head to End of First Diameter1.162 INCHES MINIMUM AND 1.182 INCHES MAXIMUM IN
Externally Relieved Body Diameter Quantity1
Surface TreatmentPASSIVATE OVERALL
Internal Drive StyleSLOT
Thread Class2A A
Test Data Document81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch16
MaterialSTEEL COMP 303 OVERALL
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Reference Number Differentiating CharacteristicsAS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
Head Diameter0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeS
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5305-01-706-1500 POSSIBLE MATCH
SCREW,EXTERNALLY RELIEVED BODY
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
3370C06H03 3/1 Design control — primary reference
Northrop Grumman Systems Corporation Div Marine Systems
Related Parts
5305-01-706-1500POSSIBLE MATCH
SCREW,EXTERNALLY RELIEVED BODY

Frequently Asked Questions

What is NSN 5305-01-067-7000?

NSN 5305-01-067-7000 is a Screw,externally Relieved Body, classified under FSC 5305, Screws. Status: active.

What NSN replaces 5305-01-067-7000?

1 possible match (shared part number, not a government interchangeability claim): 5305-01-706-1500. Verify interchangeability with system specifications before substitution.

What are the specifications of 5305-01-067-7000?

Key specifications for 5305-01-067-7000: Head Height: 0.675 INCHES MINIMUM AND 0.705 INCHES MAXIMUM IN; Fastener Length: 1.800 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Special Test Features: SPECIAL QUALITY CONTROL TESTING. 22 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-067-7000 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com