The Screw,close Tolerance, cataloged under National Stock Number 5305-01-067-5195, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc. Government technical data includes 22 specifications, cited from the U.S. Government catalog. The record lists 7 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 8 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-067-5195 |
| Primary Part Number | NASS151-9 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Fastener Length | 0.823 INCHES MINIMUM AND 0.853 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.138 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1151 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Grip Length | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN |
| Grip Diameter | 0.1365 INCHES MINIMUM AND 0.1375 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNJC |
| Head Diameter | 0.221 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| NAS1151-9 | Nor-Cal Supply Co (USA) |
| NASS151-9 PRIMARY | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| NASS151-9 PRIMARY | Hi-Shear Corporation (USA) |
| NAS1151-9 | Plastic and Metal Products Corporation (USA) |
| NAS1151-9 PRIMARY | Huck International, Inc (USA) |
| NAS1151-9 PRIMARY | Fastener Innovation Technology, Inc. Dba F I T (USA) |
| NAS1151-9 PRIMARY | Apcom Inc (USA) |
| Reference | Meaning |
|---|---|
| NAS1151-9 | 3/2 Design control — primary reference U.S. Government activity |
| NAS1151-9 | 3/2 Design control — primary reference U.S. Government activity |
| NAS1151-9 | 3/2 Design control — primary reference U.S. Government activity |
| NAS1151-9 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| NAS1151-9 | 5/9 Secondary reference Lawrence Engineering and Supply Inc |
| NAS1151-9 | 5/9 Secondary reference U.S. Government activity |
| NAS1151-9 | 5/9 Secondary reference Air Industries Co Inc |
| NAS1151-9 | 5/9 Secondary reference F and C Sales Inc |
NSN 5305-01-067-5195 is a Screw,close Tolerance, manufactured by Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-067-5195 has 7 manufacturer part numbers on file: NAS1151-9 (Nor-Cal Supply Co), NASS151-9 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), NASS151-9 (Hi-Shear Corporation), NAS1151-9 (Plastic and Metal Products Corporation), NAS1151-9 (Huck International, Inc) and 2 more.
Key specifications for NASS151-9: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Fastener Length: 0.823 INCHES MINIMUM AND 0.853 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 22 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.