PartsTable TECHNICAL DATA SHEET
NSN 5305-01-066-6748Government record, cited

Screw, Cap, Hexagon Head5305-01-066-6748

NSN 5305-01-066-6748 · NIIN 010666748
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-066-6748 · 5305010666748 · NIIN 010666748 · 01-066-6748 · FSC 5305 Screws
Nearby stock numbers  ·
Features
  • Screw,cap,hexagon Head — FSC 5305
  • Head Height: 0.591 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN
  • Fastener Length: 5.050 INCHES MINIMUM AND 5.210 INCHES MAXIMUM IN
  • Special Test Features: SPECIAL QUALITY CONTROL TESTING
  • Thread Length: 2.250 INCHES NOMINAL IN
  • Criticality Code Justification: ZZZY
  • Material Document and Classification: ASTM A193 GR B8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
  • Nominal Thread Diameter: 1.000 INCHES IN
Identification
  • NSN: 5305-01-066-6748
  • NIIN: 010666748
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,cap,hexagon Head, cataloged under National Stock Number 5305-01-066-6748, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-066-6748
Item NameScrew,cap,hexagon Head
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Head Height0.591 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN
Fastener Length5.050 INCHES MINIMUM AND 5.210 INCHES MAXIMUM IN
Special Test FeaturesSPECIAL QUALITY CONTROL TESTING
Thread Length2.250 INCHES NOMINAL IN
Criticality Code JustificationZZZY
Material Document and ClassificationASTM A193 GR B8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter1.000 INCHES IN
Head StyleHEXAGON
Thread DirectionRIGHT-HAND
Width Between Flats1.469 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
Thread Class2A A
Test Data Document81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch8
MaterialSTEEL OVERALL
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Reference Number Differentiating CharacteristicsAS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeS
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
F-425-1505 3/9 Design control — primary reference
Bingham-Willamette Co Div of Guy F Atkinson Co
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016
5305-00-001-5016 · Item name not on file
5305-00-001-9160
5305-00-001-9160 · Item name not on file
5305-00-001-9629
SCREW,ADJUSTING CLEVIS
5305-00-001-9742
5305-00-001-9742 · Item name not on file
5305-00-001-9768
SCREW,CAP,SOCKET HEAD
5305-00-003-4306
SCREW,MACHINE
5305-00-003-6694
5305-00-003-6694 · Item name not on file
5305-00-003-6753
5305-00-003-6753 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-066-6748?

NSN 5305-01-066-6748 is a Screw,cap,hexagon Head, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-01-066-6748?

Key specifications for 5305-01-066-6748: Head Height: 0.591 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN; Fastener Length: 5.050 INCHES MINIMUM AND 5.210 INCHES MAXIMUM IN; Special Test Features: SPECIAL QUALITY CONTROL TESTING; Thread Length: 2.250 INCHES NOMINAL IN. 16 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-066-6748 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com