The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-065-9232, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-065-9232 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN |
| Head Height | 0.160 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN |
| Fastener Length | 0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN |
| Thread Length | 0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN |
| Hole Configuration Style | ROUND INTERNAL HEXAGON |
| Material Document and Classification | AISI 302 ASSN STD 1ST MATERIAL RESPONSE OR AISI 303 ASSN STD 2ND MATERIAL RESPONSE OR AISI304 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 75000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Thread Quantity Per Inch | 32 |
| Material | STEEL CORROSION RESISTING OVERALL |
| Hole Quantity | 2 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Hole Type | DRILLED |
| Hole Diameter | 0.034 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN |
| Head Diameter | 0.265 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS608C832H6 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-065-9232 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-065-9232: Width Across Flats: 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN; Head Height: 0.160 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN; Fastener Length: 0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN; Thread Length: 0.365 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.