The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-063-8492, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-063-8492 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN |
| Fastener Length | 1.234 INCHES MINIMUM AND 1.281 INCHES MAXIMUM IN |
| Thread Length | 0.880 INCHES MINIMUM IN |
| Hardness Rating | 80.0 ROCKWELL B NOMINAL OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nondefinitive Spec/std Data | 4 TYPE |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 70000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 30000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Countersink Angle | 82.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 303 OR STEEL COMP 304 OVERALL |
| Thread Series Designator | UNF |
| Head Diameter | 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS24672-6 | 2/2 Government specification standardization U.S. Government activity |
| 4666881PC12 | 5/1 Secondary reference Naval Sea Systems Command |
| FF-S-86 | 4/1 Identification reference U.S. Government activity |
NSN 5305-01-063-8492 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-063-8492: Width Across Flats: 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN; Fastener Length: 1.234 INCHES MINIMUM AND 1.281 INCHES MAXIMUM IN; Thread Length: 0.880 INCHES MINIMUM IN; Hardness Rating: 80.0 ROCKWELL B NOMINAL OVERALL. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.