The Screw,machine, cataloged under National Stock Number 5305-01-059-1918, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Honeywell International Inc Dba Honeywell. Government technical data includes 14 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-059-1918 |
| Primary Part Number | 6232-0405 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Honeywell International Inc Dba Honeywell |
| Status | ACTIVE |
| Screw Surface Treatment | PASSIVATE |
| Fastener Length | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Thread Length | 0.164 INCHES MINIMUM AND 0.257 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.112 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL CORROSION RESISTING |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 82.0 DEGREES NOMINAL |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 40 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 6232-0405 PRIMARY | Honeywell International Inc Dba Honeywell (USA) |
NSN 5305-01-059-1918 is a Screw,machine, manufactured by Honeywell International Inc Dba Honeywell, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-059-1918 has 1 manufacturer part number on file: 6232-0405 (Honeywell International Inc Dba Honeywell).
Key specifications for 6232-0405: Screw Surface Treatment: PASSIVATE; Fastener Length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN; Thread Length: 0.164 INCHES MINIMUM AND 0.257 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.112 INCHES IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.