The Screw,machine, cataloged under National Stock Number 5305-01-059-0177, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-059-0177 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | CADMIUM |
| Fastener Length | 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Screw Material Document and Classification | AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE |
| Thread Length | 0.167 INCHES MINIMUM AND 0.269 INCHES MAXIMUM IN |
| Hardness Rating | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS514 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Screw Material | STEEL COMP 4037 OR STEEL COMP 8630 |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.447 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416 TY1 CL 2 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS514P428-6 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-059-0177 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-059-0177: Screw Surface Treatment: CADMIUM; Fastener Length: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN; Screw Material Document and Classification: AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE; Thread Length: 0.167 INCHES MINIMUM AND 0.269 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.