The Screw,machine, cataloged under National Stock Number 5305-01-057-6676, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Huck International, Inc. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-057-6676 |
| Primary Part Number | BACB30FL3-33 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Huck International, Inc |
| Status | ACTIVE |
| Screw Surface Treatment | CADMIUM AND CHROMATE |
| Fastener Length | 2.453 INCHES MINIMUM AND 2.498 INCHES MAXIMUM IN |
| Thread Length | 0.376 INCHES MINIMUM AND 0.451 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 81205-BACB30FL MANUFACTURERS STANDARD |
| Screw Material | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.338 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| BACB30FL3-33 | Huck International, Inc (USA) |
| Reference | Meaning |
|---|---|
| BACB30FL3-33 | 3/2 Design control — primary reference U.S. Government activity |
| BACB30FL3-33 | 5/2 Secondary reference U.S. Government activity |
| BACB30FL3-33 | 5/9 Secondary reference U.S. Government activity |
NSN 5305-01-057-6676 is a Screw,machine, manufactured by Huck International, Inc, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-057-6676 has 1 manufacturer part number on file: BACB30FL3-33 (Huck International, Inc).
Key specifications for BACB30FL3-33: Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 2.453 INCHES MINIMUM AND 2.498 INCHES MAXIMUM IN; Thread Length: 0.376 INCHES MINIMUM AND 0.451 INCHES MAXIMUM IN; Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.