The Screw,close Tolerance, cataloged under National Stock Number 5305-01-057-0347, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-057-0347 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 1.897 INCHES MINIMUM AND 1.944 INCHES MAXIMUM IN |
| Thread Length | 0.699 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.562 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM IN |
| Grip Diameter | 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HIGH-TORQUE |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 18 |
| Material | STEEL COMP E4340 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 1.135 INCHES MINIMUM AND 1.145 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 66117H9-19 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| 66117H9-19 | C/1 Advisory reference — outside the item-of-supply concept Sps Technologies Inc |
| 66117H9119 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-057-0347 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-057-0347: Fastener Length: 1.897 INCHES MINIMUM AND 1.944 INCHES MAXIMUM IN; Thread Length: 0.699 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN; Hardness Rating: 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL; Nominal Thread Diameter: 0.562 INCHES IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.