PartsTable TECHNICAL DATA SHEET
NSN 5305-01-055-3816Government record, cited

Screw, Close Tolerance5305-01-055-3816

NSN 5305-01-055-3816 · NIIN 010553816 · Part number NAS1581F3T5
Ufc Aerospace Corp. · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 5M696
Government record, cited
NSN 5305-01-055-3816 — this item is cataloged by the U.S. Government under National Stock Number 5305-01-055-3816. Manufacturer of record part number: NAS1581F3T5.
Also searched as  5305-01-055-3816 · 5305010553816 · NIIN 010553816 · 01-055-3816 · FSC 5305 Screws · CAGE 5M696 · NAS1581F3T5 · NAS1581A3T5 · 5305PL0646987 · 5305PL1686101
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Surface Finish: 32.0 MICROINCHES THREADS
  • Surface Finish: 32.0 MICROINCHES GRIP
  • Fastener Length: 0.660 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.338 INCHES MINIMUM AND 0.388 INCHES MAXIMUM IN
  • Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
  • Nominal Thread Diameter: 0.190 INCHES IN
Identification
  • NSN: 5305-01-055-3816
  • NIIN: 010553816
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: NAS1581F3T5
  • Manufacturer: Ufc Aerospace Corp.
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-01-055-3816, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Ufc Aerospace Corp.. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-055-3816
Primary Part NumberNAS1581F3T5
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
ManufacturerUfc Aerospace Corp.
StatusACTIVE
Surface Finish32.0 MICROINCHES THREADS
Surface Finish32.0 MICROINCHES GRIP
Fastener Length0.660 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.338 INCHES MINIMUM AND 0.388 INCHES MAXIMUM IN
Hardness Rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
Nominal Thread Diameter0.190 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Specification/standard Data80205-NAS1581 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
Grip Length0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
Grip Diameter0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
Surface TreatmentCADMIUM AND CHROMATE OVERALL
Minimum Tensile Strength160000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleOFFSET CRUCIFORM (TORQUE SET)
Countersink Angle100.0 DEGREES NOMINAL
Thread Class3A A
Thread Quantity Per Inch32
MaterialSTEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Head Diameter0.258 INCHES MINIMUM AND 0.305 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
NAS1581F3T5 Ufc Aerospace Corp. (USA)
Reference documents
ReferenceMeaning
NAS1581A3T5 5/9 Secondary reference
U.S. Government activity
5305PL0646987 6/9 Informative reference only
Jednolity Indeks Materialowy - Uniform Material Index
NAS1581F3T5 3/2 Design control — primary reference
U.S. Government activity
5305PL1686101 6/9 Informative reference only
Jednolity Indeks Materialowy - Uniform Material Index
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016
5305-00-001-5016 · Item name not on file
5305-00-001-9160
5305-00-001-9160 · Item name not on file
5305-00-001-9629
SCREW,ADJUSTING CLEVIS
5305-00-001-9742
5305-00-001-9742 · Item name not on file
5305-00-001-9768
SCREW,CAP,SOCKET HEAD
5305-00-003-4306
SCREW,MACHINE
5305-00-003-6694
5305-00-003-6694 · Item name not on file
5305-00-003-6753
5305-00-003-6753 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-055-3816?

NSN 5305-01-055-3816 is a Screw,close Tolerance, manufactured by Ufc Aerospace Corp., classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-01-055-3816?

NSN 5305-01-055-3816 has 1 manufacturer part number on file: NAS1581F3T5 (Ufc Aerospace Corp.).

What are the specifications of NAS1581F3T5?

Key specifications for NAS1581F3T5: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Fastener Length: 0.660 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 21 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-055-3816 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com