PartsTable TECHNICAL DATA SHEET
NSN 5305-01-054-8398Government record, cited

Screw, Close Tolerance5305-01-054-8398

NSN 5305-01-054-8398 · NIIN 010548398 · Part number ASE50287-3
Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 77445
Government record, cited
NSN 5305-01-054-8398 — this item is cataloged by the U.S. Government under National Stock Number 5305-01-054-8398. Manufacturer of record part number: ASE50287-3.
Also searched as  5305-01-054-8398 · 5305010548398 · NIIN 010548398 · 01-054-8398 · FSC 5305 Screws · CAGE 77445 · ASE50287-3 · LS15237-4-13
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Fastener Length: 1.140 INCHES MINIMUM AND 1.170 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.318 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN
  • Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
  • Nominal Thread Diameter: 0.250 INCHES IN
  • Head Style: FLAT COUNTERSUNK
  • Thread Direction: RIGHT-HAND
Identification
  • NSN: 5305-01-054-8398
  • NIIN: 010548398
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: ASE50287-3
  • Manufacturer: Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-01-054-8398, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-054-8398
Primary Part NumberASE50287-3
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
ManufacturerRtx Corporation Dba Pratt & Whitney Div Pratt &whitney
StatusACTIVE
Fastener Length1.140 INCHES MINIMUM AND 1.170 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.318 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN
Hardness Rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
Nominal Thread Diameter0.250 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Grip Length0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
Grip Diameter0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
Surface TreatmentCADMIUM AND CHROMATE OVERALL
Minimum Tensile Strength160000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleHIGH-TORQUE
Countersink Angle100.0 DEGREES NOMINAL
Thread Class3A A
Thread Quantity Per Inch28
MaterialSTEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Head Diameter0.355 INCHES MINIMUM AND 0.397 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
ASE50287-3 Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney (USA)
Reference documents
ReferenceMeaning
LS15237-4-13 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-054-8398?

NSN 5305-01-054-8398 is a Screw,close Tolerance, manufactured by Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-01-054-8398?

NSN 5305-01-054-8398 has 1 manufacturer part number on file: ASE50287-3 (Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney).

What are the specifications of ASE50287-3?

Key specifications for ASE50287-3: Fastener Length: 1.140 INCHES MINIMUM AND 1.170 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.318 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN; Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL. 18 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-054-8398 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com