The Screw,machine, cataloged under National Stock Number 5305-01-054-8066, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is K&l Microwave Llc. Government technical data includes 12 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-054-8066 |
| Primary Part Number | APS-18-114-49-5 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | K&l Microwave Llc |
| Status | ACTIVE |
| Head Height | 0.107 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN |
| Fastener Length | 1.094 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN |
| Thread Length | 1.032 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Head Style | ROUND |
| Thread Direction | RIGHT-HAND |
| Screw Material | PLASTIC POLYAMIDE NYLON |
| Internal Drive Style | SLOT |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| APS-18-114-49-5 PRIMARY | K&l Microwave Llc (USA) |
| Reference | Meaning |
|---|---|
| APS-18-114-49-5 | 5/9 Secondary reference U.S. Government activity |
NSN 5305-01-054-8066 is a Screw,machine, manufactured by K&l Microwave Llc, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-054-8066 has 1 manufacturer part number on file: APS-18-114-49-5 (K&l Microwave Llc).
Key specifications for APS-18-114-49-5: Head Height: 0.107 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN; Fastener Length: 1.094 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN; Thread Length: 1.032 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.164 INCHES IN. 12 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.