The Screw,machine, cataloged under National Stock Number 5305-01-053-6838, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-053-6838 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN |
| Screw Surface Treatment | PASSIVATE |
| Fastener Length | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Screw Material Document and Classification | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| Thread Length | 0.231 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.112 INCHES IN |
| Head Style | BINDING |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL CORROSION RESISTING |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | SLOT |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 40 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.223 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | 3608009,FSCM 27914 MFR REF SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 5432-04-05 | 5/9 Secondary reference Honeywell International Inc Dba Honeywell |
| 5432-04-05 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-053-6838 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-053-6838: Head Height: 0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN; Screw Surface Treatment: PASSIVATE; Fastener Length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN; Screw Material Document and Classification: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.