The Screw,cap,hexagon Head, cataloged under National Stock Number 5305-01-049-4039, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-049-4039 |
| Item Name | Screw,cap,hexagon Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM IN |
| Fastener Length | 11.820 INCHES MINIMUM AND 12.140 INCHES MAXIMUM IN |
| Thread Length | 3.500 INCHES MINIMUM AND 3.750 INCHES MAXIMUM IN |
| Hardness Rating | 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.750 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 1.100 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN |
| Minimum Tensile Strength | 120000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 92000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 10 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 13217E1161-2 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-049-4039 is a Screw,cap,hexagon Head, classified under FSC 5305, Screws. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5306-01-394-3456. Verify interchangeability with system specifications before substitution.
Key specifications for 5305-01-049-4039: Head Height: 0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM IN; Fastener Length: 11.820 INCHES MINIMUM AND 12.140 INCHES MAXIMUM IN; Thread Length: 3.500 INCHES MINIMUM AND 3.750 INCHES MAXIMUM IN; Hardness Rating: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.