The Screw,machine, cataloged under National Stock Number 5305-01-049-0616, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is The Boeing Company Div Legacy Am&m. Government technical data includes 17 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-049-0616 |
| Primary Part Number | 7S33-3A2H |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | The Boeing Company Div Legacy Am&m |
| Status | ACTIVE |
| Head Height | 0.103 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN |
| Screw Surface Treatment | CADMIUM AND CHROMATE |
| Fastener Length | 0.401 INCHES NOMINAL IN |
| Thread Length | 0.276 INCHES MINIMUM IN |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | TORQUE SET |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Hole Quantity | 1 |
| Thread Series Designator | UNF |
| Head Hole Configuration Style | ROUND LONGITUDINAL HOLE |
| Hole Diameter | 0.038 INCHES NOMINAL IN |
| Head Diameter | 0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 7S33-3A2H PRIMARY | The Boeing Company Div Legacy Am&m (USA) |
NSN 5305-01-049-0616 is a Screw,machine, manufactured by The Boeing Company Div Legacy Am&m, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-049-0616 has 1 manufacturer part number on file: 7S33-3A2H (The Boeing Company Div Legacy Am&m).
Key specifications for 7S33-3A2H: Head Height: 0.103 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN; Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 0.401 INCHES NOMINAL IN; Thread Length: 0.276 INCHES MINIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.