The Screw,close Tolerance, cataloged under National Stock Number 5305-01-047-7848, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Northrop Grumman Systems Corporation. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-047-7848 |
| Primary Part Number | 53B333-15 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Northrop Grumman Systems Corporation |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Fastener Length | 1.327 INCHES MINIMUM AND 1.374 INCHES MAXIMUM IN |
| Thread Length | 0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN |
| Hardness Rating | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.927 INCHES MINIMUM AND 0.947 INCHES MAXIMUM IN |
| Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OR CADMIUM OVERALL |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.329 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 53B333-15 PRIMARY | Northrop Grumman Systems Corporation (USA) |
| Reference | Meaning |
|---|---|
| 53B333-15 | 3/9 Design control — primary reference Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Northrop Grumman Aeronautics Systems |
| 53B333-15 | 5/9 Secondary reference Northrop Grumman Technical Services, Inc. Dba Defense Systems Sector |
NSN 5305-01-047-7848 is a Screw,close Tolerance, manufactured by Northrop Grumman Systems Corporation, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-047-7848 has 1 manufacturer part number on file: 53B333-15 (Northrop Grumman Systems Corporation).
Key specifications for 53B333-15: Surface Finish: 32.0 MICROINCHES GRIP; Fastener Length: 1.327 INCHES MINIMUM AND 1.374 INCHES MAXIMUM IN; Thread Length: 0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN; Hardness Rating: 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.