The Screw,machine, cataloged under National Stock Number 5305-01-047-7805, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Naval Inventory Control Point Mechanicsburg. Government technical data includes 13 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-047-7805 |
| Primary Part Number | CAV71-C2-5K |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Naval Inventory Control Point Mechanicsburg |
| Status | ACTIVE |
| Head Height | 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN |
| Screw Surface Treatment | OXIDE |
| Fastener Length | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Thread Length | 0.245 INCHES MINIMUM IN |
| Nominal Thread Diameter | 0.086 INCHES IN |
| Head Style | FILLISTER |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 OR STEEL COMP 303 |
| Internal Drive Style | SLOT |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 56 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| CAV71-C2-5K PRIMARY | Naval Inventory Control Point Mechanicsburg (USA) |
NSN 5305-01-047-7805 is a Screw,machine, manufactured by Naval Inventory Control Point Mechanicsburg, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-047-7805 has 1 manufacturer part number on file: CAV71-C2-5K (Naval Inventory Control Point Mechanicsburg).
Key specifications for CAV71-C2-5K: Head Height: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN; Screw Surface Treatment: OXIDE; Fastener Length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN; Thread Length: 0.245 INCHES MINIMUM IN. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.