The Screw,close Tolerance, cataloged under National Stock Number 5305-01-044-3012, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-044-3012 |
| Primary Part Number | HT326-6A15 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Fastener Length | 1.322 INCHES MINIMUM AND 1.369 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | NAS 672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-S-8837 TY 2 CL 3 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| Thread Length | 0.375 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 26512-GB510N MANUFACTURERS STANDARD |
| Grip Length | 0.927 INCHES MINIMUM AND 0.947 INCHES MAXIMUM IN |
| Grip Diameter | 0.3733 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OR CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HIGH-TORQUE |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.698 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HT326-6A15 PRIMARY | Hi-Shear Corporation (USA) |
| BM19045-6-15A PRIMARY | Huck International, Inc (USA) |
| HT326-6A15 | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| Reference | Meaning |
|---|---|
| SFH22D6A15 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| GB510N6A15 | 7/2 Vendor item drawing reference Northrop Grumman Systems Corporation |
| BM19045-6-15A | 5/9 Secondary reference U.S. Government activity |
| SHF22D6A15 | 3/2 Design control — primary reference U.S. Government activity |
| HT8181F6-15 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-044-3012 is a Screw,close Tolerance, manufactured by Hi-Shear Corporation, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-044-3012 has 3 manufacturer part numbers on file: HT326-6A15 (Hi-Shear Corporation), BM19045-6-15A (Huck International, Inc), HT326-6A15 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc).
Key specifications for HT326-6A15: Surface Finish: 32.0 MICROINCHES GRIP; Fastener Length: 1.322 INCHES MINIMUM AND 1.369 INCHES MAXIMUM IN; Surface Treatment Document and Classification: NAS 672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-S-8837 TY 2 CL 3 MIL SPEC 2ND TREATMENT RESPONSE OVERALL; Thread Length: 0.375 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.