The Screw,machine, cataloged under National Stock Number 5305-01-043-7702, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Plastic and Metal Products Corporation. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 11 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-043-7702 |
| Primary Part Number | NAS1101-08H5 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Plastic and Metal Products Corporation |
| Status | ACTIVE |
| Head Height | 0.088 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN |
| Screw Surface Treatment | CADMIUM AND CHROMATE |
| Fastener Length | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Thread Length | 0.219 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Head Style | PAN NO. 2 |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 80205-NAS1101 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Screw Material | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HIGH-TORQUE |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Hole Quantity | 2 |
| Thread Series Designator | UNJC |
| Head Hole Configuration Style | ROUND |
| Hole Diameter | 0.047 INCHES NOMINAL IN |
| Head Diameter | 0.265 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| NAS1101-08H5 | Plastic and Metal Products Corporation (USA) |
| NAS1101-08H5 | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| NAS1101-08H5 | Qualified Air Components Inc. (USA) |
| NAS1101-08H5 | Hi-Shear Corporation (USA) |
| NAS1101-08H5 | Eriks Southwest Inc Dba Montclair Enterprises (USA) |
| NAS1101-08H5 | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| NAS1101-08H5 | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| NAS1101-08H5 | Nor-Cal Supply Co (USA) |
| NAS1101-08H5 | Huck International, Inc (USA) |
| NAS1101-08H5 | Fastener Innovation Technology, Inc. Dba F I T (USA) |
| NAS1101-08H5 | Afcon Products, Inc. (USA) |
| Reference | Meaning |
|---|---|
| NAS1101-08H5 | 5/2 Secondary reference U.S. Government activity |
| NAS1101-08H5 | 5/9 Secondary reference Wallace R G Co Div of Ducommun Inc |
| NAS1101-08H5 | 3/2 Design control — primary reference U.S. Government activity |
| NAS1101-08H5 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| NAS1101-08H5 | 5/9 Secondary reference U.S. Government activity |
| NAS1101-08H5 | 5/2 Secondary reference U.S. Government activity |
NSN 5305-01-043-7702 is a Screw,machine, manufactured by Plastic and Metal Products Corporation, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-043-7702 has 11 manufacturer part numbers on file: NAS1101-08H5 (Plastic and Metal Products Corporation), NAS1101-08H5 (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company), NAS1101-08H5 (Qualified Air Components Inc.), NAS1101-08H5 (Hi-Shear Corporation), NAS1101-08H5 (Eriks Southwest Inc Dba Montclair Enterprises) and 6 more.
Key specifications for NAS1101-08H5: Head Height: 0.088 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN; Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN; Thread Length: 0.219 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.