The Screw,close Tolerance, cataloged under National Stock Number 5305-01-043-5740, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-043-5740 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN |
| Fastener Length | 4.606 INCHES MINIMUM AND 4.626 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | CROWNED HEXAGON |
| Thread Direction | RIGHT-HAND |
| Grip Length | 4.188 INCHES MINIMUM AND 4.203 INCHES MAXIMUM IN |
| Width Between Flats | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN |
| Grip Diameter | 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | SLOT |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP XM-13 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 4.511 INCHES MINIMUM AND 4.531 INCHES MAXIMUM FIRST HOLE IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NASM3369B467 | 3/2 Design control — primary reference U.S. Government activity |
| CA2658-4-67 | 5/9 Secondary reference Howmet Global Fastening Systems Inc. Div Tridair Products |
| AS169-4-67 | 5/2 Secondary reference U.S. Government activity |
| MS3369B467 | 5/9 Secondary reference U.S. Government activity |
NSN 5305-01-043-5740 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-043-5740: Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN; Fastener Length: 4.606 INCHES MINIMUM AND 4.626 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.