The Screw,cap,hexagon Head, cataloged under National Stock Number 5305-01-036-5540, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-036-5540 |
| Item Name | Screw,cap,hexagon Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES THREADS |
| Head Height | 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN |
| Fastener Length | 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.750 INCHES MAXIMUM IN |
| Hardness Rating | 235.0 BRINELL STANDARD MAXIMUM OVERALL |
| Shank Unthreaded Hole Diameter | 0.074 INCHES MINIMUM AND 0.082 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | FF-S-85,GR 8 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN |
| Nondefinitive Spec/std Data | 2 TYPE AND 10P STYLE |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 70000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 40000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 0.600 INCHES MINIMUM AND 0.651 INCHES MAXIMUM FIRST HOLE IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NASM51109 | 3/1 Design control — primary reference U.S. Government activity |
| MS51109-6 | 3/2 Design control — primary reference U.S. Government activity |
| FF-S-85 | 4/1 Identification reference U.S. Government activity |
| MS51109-6 | 5/9 Secondary reference U.S. Government activity |
NSN 5305-01-036-5540 is a Screw,cap,hexagon Head, classified under FSC 5305, Screws. Status: active.
2 possible matches (shared part number, not a government interchangeability claim): 5305-01-187-6074, 5305-01-256-5202. Verify interchangeability with system specifications before substitution.
Key specifications for 5305-01-036-5540: Surface Finish: 63.0 MICROINCHES THREADS; Head Height: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN; Fastener Length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.