The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-036-3965, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-036-3965 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Spline Minor Diameter | 0.098 INCHES MAXIMUM IN |
| Head Height | 0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN |
| Fastener Length | 0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN |
| Spline Width | 0.023 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN |
| Thread Length | 0.372 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN |
| Spline Major Diameter | 0.114 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.112 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Internal Drive Style | SIX SPLINE |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 40 |
| Material | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 303SE OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.176 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 92522040700 | 3/9 Design control — primary reference Honeywell Intl Inc Defense Avionics Systems |
| 92522040700 | 5/9 Secondary reference Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems |
NSN 5305-01-036-3965 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-036-3965: Spline Minor Diameter: 0.098 INCHES MAXIMUM IN; Head Height: 0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN; Fastener Length: 0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN; Spline Width: 0.023 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.