The Screw,tapping, cataloged under National Stock Number 5305-01-031-0686, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 11 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-031-0686 |
| Item Name | Screw,tapping |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Nonmachine Nominal Thread Diameter | 0.190 INCHES IN |
| Extended Washer Thickness | 0.019 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN |
| Head Height | 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN |
| Fastener Length | 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE OR MIL-C-81562 TYPE II,CLASS 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| Extended Washer Diameter | 0.384 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN |
| Material Document and Classification | AISI ASSN STD ALL MATERIAL RESPONSES OR SAE ASSN STD ALL MATERIAL RESPONSES OVERALL |
| Head Style | HEXAGON EXTENDED WASHER |
| Width Between Flats | 0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Nondefinitive Spec/std Data | SF TYPE OR SW TYPE OR TT TYPE |
| Surface Treatment | CADMIUM OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS51869-12 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-01-031-0686 is a Screw,tapping, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-031-0686: Nonmachine Nominal Thread Diameter: 0.190 INCHES IN; Extended Washer Thickness: 0.019 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN; Head Height: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN; Fastener Length: 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.