The Screw,close Tolerance, cataloged under National Stock Number 5305-01-027-4657, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-027-4657 |
| Primary Part Number | LS15235C4-30 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc |
| Status | ACTIVE |
| Fastener Length | 2.176 INCHES MINIMUM AND 2.206 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.301 INCHES MINIMUM AND 0.331 INCHES MAXIMUM IN |
| Material Document and Classification | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.875 INCHES NOMINAL IN |
| Grip Diameter | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HIGH-TORQUE |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | IRON ALLOY 660 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.456 INCHES MINIMUM AND 0.508 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| LS15235C4-30 | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| LS15235C4-30 | Hi-Shear Corporation (USA) |
| LS15235C4-30 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| LS15235C4-30 | Huck International, Inc (USA) |
| Reference | Meaning |
|---|---|
| LS15235C4-30 | 5/9 Secondary reference Lockheed Martin Corp Lockheed Martin Aeronautical Systems Burbank Opns |
| LS15235C4-30 | 5/9 Secondary reference Deutsch Fastener Corp |
| LS15235C4-30 | 5/9 Secondary reference U.S. Government activity |
| LS15235C4-30 | 5/2 Secondary reference U.S. Government activity |
| LS15235C4-30 | 3/2 Design control — primary reference U.S. Government activity |
| ASA1821 | 5/9 Secondary reference Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney |
NSN 5305-01-027-4657 is a Screw,close Tolerance, manufactured by Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-027-4657 has 4 manufacturer part numbers on file: LS15235C4-30 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), LS15235C4-30 (Hi-Shear Corporation), LS15235C4-30 (Sps Technologies, Llc Dba PB Fasteners), LS15235C4-30 (Huck International, Inc).
Key specifications for LS15235C4-30: Fastener Length: 2.176 INCHES MINIMUM AND 2.206 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.301 INCHES MINIMUM AND 0.331 INCHES MAXIMUM IN; Material Document and Classification: AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.