The Screw,machine, cataloged under National Stock Number 5305-01-024-7528, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-024-7528 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | OXIDE |
| Fastener Length | 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN |
| Thread Length | 1.316 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.138 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nondefinitive Spec/std Data | 3 TYPE AND 3C STYLE |
| Screw Material | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 323 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FF-S-92 | 4/1 Identification reference U.S. Government activity |
| MS24693-36B | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-01-024-7528 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-024-7528: Screw Surface Treatment: OXIDE; Fastener Length: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN; Thread Length: 1.316 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.138 INCHES IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.