The Screw,machine, cataloged under National Stock Number 5305-01-024-3253, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-024-3253 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | CADMIUM AND CHROMATE |
| Fastener Length | 2.406 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN |
| Screw Material Document and Classification | 66 FED STD SINGLE MATERIAL RESPONSE OR QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE |
| Thread Length | 1.750 INCHES MINIMUM IN |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nondefinitive Spec/std Data | 3 TYPE AND 3C STYLE |
| Screw Material | STEEL |
| Minimum Tensile Strength | 60000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 24 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.333 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FF-S-92 | 4/1 Identification reference U.S. Government activity |
| MS24693-S86 | 5/9 Secondary reference U.S. Government activity |
| MS24693-S86 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-024-3253 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-024-3253: Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 2.406 INCHES MINIMUM AND 2.500 INCHES MAXIMUM IN; Screw Material Document and Classification: 66 FED STD SINGLE MATERIAL RESPONSE OR QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE; Thread Length: 1.750 INCHES MINIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.