The Screw,cap,hexagon Head, cataloged under National Stock Number 5305-01-024-1841, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-024-1841 |
| Item Name | Screw,cap,hexagon Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN |
| Fastener Length | 1.210 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN |
| Thread Length | 1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN |
| Nondefinitive Spec/std Data | 2 TYPE AND 1OP STYLE |
| Minimum Tensile Strength | 60000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 16 |
| Material | STEEL COMP 5140H OR COPPER ALLOY 462 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| AN65BG-12 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| MS35309-362 | 2/2 Government specification standardization U.S. Government activity |
| FF-S-85 | 4/1 Identification reference U.S. Government activity |
| MS35309-62 | 5/9 Secondary reference U.S. Government activity |
| FFS85TYPE2STYLE10P | 5/9 Secondary reference U.S. Government activity |
NSN 5305-01-024-1841 is a Screw,cap,hexagon Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-024-1841: Head Height: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN; Fastener Length: 1.210 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN; Thread Length: 1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.375 INCHES IN. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.