The Screw,machine, cataloged under National Stock Number 5305-01-020-6887, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-020-6887 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | PASSIVATE |
| Fastener Length | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Screw Material Document and Classification | ASTM A582 TY 303 FED SPEC SINGLE MATERIAL RESPONSE |
| Thread Length | 0.161 INCHES MINIMUM AND 0.264 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.138 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nondefinitive Spec/std Data | 3 TYPE AND 2C STYLE |
| Screw Material | STEEL COMP 303 |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 81.0 DEGREES NOMINAL |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.249 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| AN505C6-5 | C/1 Advisory reference — outside the item-of-supply concept Zf Industrieantriebe Witten Gmbh |
| AN505C6R5 | 2/2 Government specification standardization U.S. Government activity |
| FF-S-92 | 4/1 Identification reference U.S. Government activity |
NSN 5305-01-020-6887 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-020-6887: Screw Surface Treatment: PASSIVATE; Fastener Length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN; Screw Material Document and Classification: ASTM A582 TY 303 FED SPEC SINGLE MATERIAL RESPONSE; Thread Length: 0.161 INCHES MINIMUM AND 0.264 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.