The Screw,close Tolerance, cataloged under National Stock Number 5305-01-006-8992, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-006-8992 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Width Across Flats | 0.156 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN |
| Head Height | 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| Fastener Length | 0.604 INCHES MINIMUM AND 0.624 INCHES MAXIMUM IN |
| Thread Length | 0.405 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN |
| Material Document and Classification | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.135 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN |
| Grip Diameter | 0.1889 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM IN |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | IRON ALLOY 660 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.306 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 3012T01P01 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-006-8992 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-006-8992: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Width Across Flats: 0.156 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN; Head Height: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.