The Setscrew, cataloged under National Stock Number 5305-00-995-6877, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Eastman Kodak Co. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-995-6877 |
| Primary Part Number | 454293 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Eastman Kodak Co |
| Status | ACTIVE |
| Point Diameter | 0.118 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN |
| Point Length | 0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| Fastener Length | 0.333 INCHES MINIMUM AND 0.353 INCHES MAXIMUM IN |
| Thread Length | 0.060 INCHES MINIMUM IN |
| Material Document and Classification | EK135 FSCM 19139 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| Point Chamfer Angle | 45.0 DEGREES NOMINAL |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Head Style | HEADLESS (SETSCREW) |
| Thread Direction | RIGHT-HAND |
| Point Style | CHAMFER DOG |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | SLOT |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 454293 PRIMARY | Eastman Kodak Co (USA) |
NSN 5305-00-995-6877 is a Setscrew, manufactured by Eastman Kodak Co, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-995-6877 has 1 manufacturer part number on file: 454293 (Eastman Kodak Co).
Key specifications for 454293: Point Diameter: 0.118 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN; Point Length: 0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN; Fastener Length: 0.333 INCHES MINIMUM AND 0.353 INCHES MAXIMUM IN; Thread Length: 0.060 INCHES MINIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.