The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-992-6136, is classified within Federal Supply Class 5305 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 20 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-992-6136 |
| Primary Part Number | MS16995-55 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — No Item Name Available |
| Manufacturer | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Thread Length | 1.250 INCHES MAXIMUM IN |
| Thread Class | 3A A |
| Surface Treatment | PASSIVATE OVERALL |
| Test Data Document | 81348-FFS86 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 96906-MS16995-55 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| Material Document and Classification | QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Thread Direction | RIGHT-HAND |
| Nondefinitive Spec/std Data | 6 TYPE |
| Minimum Tensile Strength | 80 POUNDS PER SQUARE INCH LBS |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Internal Drive Style | HEXAGON |
| Departure From Cited Document | AS MODIFIED BY MATERIAL |
| Width Across Flats | 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| Material | STEEL COMP 304 OVERALL |
| Thread Quantity Per Inch | 20 |
| Head Diameter | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Head Height | 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Minimum Yield Strength | 30 POUNDS PER SQUARE INCH LBS |
| Fastener Length | 1.750 INCHES MAXIMUM IN |
| Head Style | FLAT CHAMFER |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MS16995-55 | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5305-00-992-6136 is a Screw,cap,socket Head, manufactured by Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5305 (No Item Name Available). Status: active.
NSN 5305-00-992-6136 has 1 cross-referenced part number: MS16995-55 (Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M).
There are 2 known substitutes for 5305-00-992-6136: 5305-00-988-7834, 5305-00-988-7836. Verify interchangeability with system specifications before substitution.
Key specifications for MS16995-55: Thread Length: 1.250 INCHES MAXIMUM IN; Thread Class: 3A A; Surface Treatment: PASSIVATE OVERALL; Test Data Document: 81348-FFS86 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 96906-MS16995-55 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).. 20 total characteristics are documented in the Federal Logistics Information System.